|
24 Volt Speed Controllers
24 Volts Speed Controllers for Brushed Motors
Brushed motors have two power wires.
24 Volt 500 Watt
|
24V 500W Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection
20.5 Volts. Current limiting feature helps prevent controller
and motor damage due to over-current conditions.
Under voltage protection feature helps prevent over-discharge
and extends battery life. Uses standard 3-wire variable
speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric
scooter and bicycle models.
Item # SPD-24500
Wiring Directions |
$39.95
|
24 Volt 500-600 Watt
|
Currie 24V 500W-600W Electric Bicycle Speed Controller
Designed for 24 Volt motors up to 600 Watts. Maximum current 35 Amps. Under
Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and
motor damage due to over-current conditions. Fits Currie Electro Drive 450 Watt electric bicycle conversion kit
plus some eZip and IZIP electric bicycles.
Some controllers that this one replaces have wires coming out of the long
side instead of the short side of the case like this controller does.
Replaces model numbers: 24V 35A / 24V 1-4V 35A / CT-2435-003 / DM-CB24-PAS /
DM-140LA.
Item # SPD-SD450
Wiring Directions |
$59.95
|
|
Pedal Assist Delete Speed Controller for eZip® and IZIP® Electric Bicycles
Speed controller for the eZip® Coastline and Trailz plus IZIP® Mountain Trails, Trailz, Skyline, and Urban Cruiser electric bicycles. Deletes the pedal assist and pedal assist switch function so
only the throttle controls the speed of the motor.
Speed controllers with pedal assist functionality are discontinued so we offer this controller as a way to keep the bike running
if the original controller fails. This controller has one brake switch connector.
If a controller with two brake switch connectors is needed then item # BRK-ADAPTER8
listed below can be used to adapt this controller to have two brake switch connectors.
Wiring Directions
Item # SPD-SD450 |
$59.95
|
24 Volts Speed Controllers for Brushless Motors
Brushless motors have three power wires and between zero to five sensor wires.
24 Volt 150-250 Watt Brushless
|
24 Volt 150-250 Watt Electric Scooter/Moped/Bike Brushless DC Motor Speed Controller
(CW or CCW)
Designed for 24V brushless DC motors between 150W and 250W. Replaces
controllers with fewer connectors because most of the connectors are optional to
use. Under Voltage protection
19 Volts. Current limiting feature helps prevent controller and motor damage due to
over-current conditions. Under voltage protection feature helps prevent
over-discharge and extends battery life. Compatible with standard 3-wire
variable speed hall-effect throttles.
Dimensions: 3-1/2" L x 2-1/2" W x 1-1/4" T
Item # SPD-24250BLDC
Wiring Directions |
$29.95
|
24 Volt 500-600 Watt Brushless
|
24 Volt 500-600 Watt Electric Scooter/Moped/Bike Brushless Motor Speed Controller
(CW or CCW with Optional Reverse)
Designed for 24V brushless DC motors between 500 and 600 Watts. Replaces
controllers with fewer connectors because most of the connectors are optional to
use. Under Voltage protection 19 Volts. Current limiting feature helps prevent motor and controller damage due to
over-current conditions. Under voltage protection feature helps prevent
over-discharge and extends battery life. Compatible with standard 3-wire
variable speed hall-effect throttles.
Dimensions: 6" L x 3-1/2" W x 1-3/4" T
Item # SPD-24500BLDC
Wiring Directions |
$59.95
|
Speed Controller Connectors
|