Speed Controller SPD-24120 Installation and Wiring |
Rated Voltage | 24 Volts |
Rated For Motors | Up To 120 Watts |
Maximum Current | 10 Amps |
Rated For Chargers | Up To 2 Amps |
Conversion Efficiency | 95% |
Under Voltage Protection | 20.5 Volts |
Recommended Fuse Size | 10 Amps |
Dimensions | 2-5/8" Long x 1-7/8" Wide x 3/4" High |
Under Voltage Battery Protection:
When the battery pack falls below a specific Voltage the controller
turns the motor off preventing over discharging of the battery pack
which extends the battery packs lifespan. (The cutoff value is
approximately 20.5 Volts ± 1.0 Volts) Motor Cut-Off During Braking: When the brakes are engaged the brake switch signals the controller to turn off the motor. |
|
*The battery pack
should be the last connection made. *Fuse or circuit breaker protection is required between the speed controller and the battery pack. |