 #25
and #25H Chain
#25 and #25H chain is the most common type of chain used on electric scooters, electric bicycles, electric pocket bikes,
electric dirt bikes, and small electric go karts. #25 and #25H chain has a 1/4"
center to center spacing between each link pin, an 1/8" spacing between inner
plates, and is approximately 1/4" wide.
T8F (8mm) Chain
T8F 8mm chain and is the most common type of chain used on
higher powered pocket bikes and electric scooters. T8F 8mm chain has
an 8mm (approximately 5/16") center to center spacing between each link pin, a 4.7mm
(approximately 3/16") spacing between inner plates, and is around 10mm (approximately 3/8") wide.
#35 Chain #35 chain is
the most common type of chain used on mopeds, mini bikes, and full size go karts.
#35 chain has a 3/8" center to center spacing between each link pin, a
3/16" spacing between inner plates, and is approximately 3/8" wide.
#408
(1/2"
x 3/32") Chain
1/2" x 3/32" chain is
used on multiple speed bicycles with derailleurs and cluster sprockets. 1/2" x 3/32" chain has a 1/2"
center to center spacing between each link
pin, a 3/32" spacing between inner plates, and is approximately 3/8" wide.
#410
(1/2" x 1/8") Chain
#410 chain is
used on single speed bicycles, internal gears bicycles such as three speeds, and for electric bicycle motors. #410 chain has a 1/2"
center to center spacing between each link pin, a 1/8" spacing between inner
plates, and is approximately 3/8" wide.
#410 chain is also known as 1/2"x1/8" chain.
#415
and #415H (1/2" x 3/16") Chain
#415 and #415H chain is
used on motorized bicycles, freight bicycles, and heavy-duty tricycles. #415 and
#415H chain has a 1/2"
center to center spacing between each link pin, a 3/16" spacing between inner
plates, and is approximately 3/8" wide.
#415 and #415H chain is also known as 1/2"x3/16" chain.
#420
(#41) Chain
#420 chain is the exact same size as #41 chain however it has thicker pins which
makes it stronger.
#420 chain is used on motorcycles, mini bikes, go karts, and motorized tricycles. #420
chain has a 1/2" center to center spacing between each link pin, a 1/4"
spacing between inner plates, and is approximately 1/2" wide.
#428
Chain
#428 chain is used on motorcycles, mini bikes, go karts, and motorized tricycles. #428
chain has a 1/2" center to center spacing between each link pin, a 5/16"
spacing between inner plates, and is approximately 5/8" wide.
| 
