|
Wire Connectors > Battery Harnesses
Battery Harnesses
|
3 Pin House
Charger Port or Power Port with Wires and Ring Terminals
House shaped electric scooter, moped, and bike battery
charger or power port with three vertical pins.
Two 7" long 14 gauge stranded copper wires with 5.3mm ID ring terminals. Item # CNX-615 |
$6.95
|
|
3 Pin House
Charger Port or Power Port with Wires, Fuse Holder, and Ring Terminals
House shaped electric scooter, moped, and bike battery
charger or power port with three vertical pins.
One 19.6" long red wire and one 11.8" black wire. 14 gauge stranded copper wires with 5.3mm ID ring terminals.
Built-in fuse holder for ATO fuses with 30A fuse included.
Item # CNX-618 |
$10.95
|
|
24 Volt Currie® Electric Scooter Battery Harness
Battery pack wiring harness for 24 Volt Currie® brand electric scooters including, eZip®, IZIP®, Mongoose®, GT®, and Schwinn®.
Premium locking tab terminals lock themselves onto the battery tabs until a button
is pressed to release them. Made with 12 gauge stranded copper wire. Item # CNX-BA0574 |
$14.95
|
|
36 Volt Currie® Electric Scooter Battery Harness
Battery pack wiring harness for many 36 Volt Currie® brand scooters including, eZip®, IZIP®, Mongoose®, GT®, and Schwinn®.
Premium locking tab terminals lock themselves onto the battery tabs until a button
is pressed to release them. Made with 12 gauge stranded copper wire. Item # CNX-BA0572 |
$16.95
|
|
6" Long Electric Scooter and Bike Battery Pack Jumper Cable
Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal
connectors. Designed for interconnecting multiple batteries into a single
battery pack. Premium locking tab terminals lock themselves onto the battery
tabs until a button is pressed to release them. Made with 12 gauge stranded
copper wire.
Item # CNX-146 |
$3.79
|
|
9" Long Electric Scooter and Bike Battery Pack Jumper Cable
Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal
connectors. Designed for interconnecting multiple batteries into a single
battery pack. Premium locking tab terminals lock themselves onto the battery
tabs until a button is pressed to release them. Made with 12 gauge stranded
copper wire.
Item # CNX-149 |
$3.95
|
|
12" Long Electric Scooter and Bike Battery Pack Jumper Cable
Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal
connectors. Designed for interconnecting multiple batteries into a single
battery pack. Premium locking tab terminals lock themselves onto the battery
tabs until a button is pressed to release them. Made with 12 gauge stranded
copper wire.
Item # CNX-152 |
$4.10
|
|
15" Long Electric Scooter and Bike Battery Pack Jumper Cable
Battery pack jumper cable with 1/4" (6.3mm) wide push-on tab terminal
connectors. Designed for interconnecting multiple batteries into a single
battery pack. Premium locking tab terminals lock themselves onto the battery
tabs until a button is pressed to release them. Made with 12 gauge stranded
copper wire.
Item # CNX-155 |
$4.25
|
|
10" Long Electric Scooter and Bike
Battery Pack Jumper Cable with 5mm Ring Terminals
Ten inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-180 |
$3.95
|
|
12" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Twelve inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-181 |
$4.10
|
|
12" Long Electric Scooter and Bike
Battery Pack Jumper Cable with 5mm Insulated Ring Terminals
Twelve inch long battery pack jumper cable with top and side insulated 5mm ID ring terminal
connectors. Tethered top insulator cap has a small hole in it for battery
testing access. These premium class battery cables are made with high temperature silicone coated fabric shielded vinyl
insulated 12 gauge copper wire.
Item # CNX-181F |
$3.95
|
|
15" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Fifteen inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-182 |
$4.25
|
|
18" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Eighteen inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-183 |
$4.50
|
|
24" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Twenty four inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12
gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-184 |
$4.95
|
|
10" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Ten inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-170 |
$3.95
|
|
12" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Twelve inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-171 |
$4.10
|
|
15" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Fifteen inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-172 |
$4.25
|
|
18" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Eighteen inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-173 |
$4.50
|
|
24" Long
Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Twenty four inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12
gauge stranded copper wire.
Connectors are crimped onto the wire and then soldered for extra strength. Designed for
interconnecting multiple batteries into a single battery pack.
Item # CNX-174 |
$4.95
|
|
Wiring Harness with Fuse for Currie®, GT®, Mongoose®, and Schwinn® Electric Scooter
Wiring harness with fuse for some models of Currie®, GT®, Mongoose®, and
Schwinn® electric scooter. Compatible with charger ports that have two wires. Installation Directions
Item # CNX-BA05604 |
$39.95
|
|
Wiring Harness for eZip® 400, 500, and 750 Electric Scooter
Wiring harness for the eZip® 400, 500, and 750 electric scooter.
Item # CNX-BA05610
|
$39.95
|
|
Battery Pack Wiring Harness for IZIP® EzGo Electric Bicycle
Wiring harness for the IZIP® EzGo electric bicycle removable battery pack. Item # CNX-BA071B6
|
$29.95
|
|
Wiring Harness for Currie® IZIP® RMB Electric Bicycles and Electro Drive® Electric Bicycle Kits
Wiring harness for Currie® IZIP® RMB electric bicycles and Electro Drive® electric bicycle kits.
Item # CTE-24384 |
$9.95
|
|
Battery Terminal Wiring Harness for Currie® IZIP® RMB Electric Bicycles And Electro Drive® Electric Bicycle Kits
Battery terminal wiring harness for Currie® IZIP® RMB electric bicycles and Electro Drive® electric bicycle kits.
Item # CTE-24386 |
$9.95
|
Related Items: Wire | Fuses | Fuse Holders | Circuit Breakers
|