|
48 Volt Motors
We only sell premium quality electric scooter, bike, and go kart motors made by top quality manufacturers such as Unite®
and Jindun®.
48 Volt Brushed Motors
48V 500W 2500 RPM
|
48 Volt 500 Watt 2500 RPM Electric Scooter Motor
48V 500W 2500RPM electric scooter motor. Powerful four brush permanent magnet
design with 100% ball bearing construction. Includes 11 tooth sprocket for #25
chain. 8.5mm x 10mm sprocket mounting area.
Different size sprockets are available for this motor. 18" long power leads.
Shaft rotation reversible by reversing power leads. Dimensions: 4.2" (106mm)
wide x 5.275" (134mm) long excluding shaft, 6-1/2" long including
shaft. Shaft is 1" long and sprocket is spaced 5/8" away from front of motor.
Front and rear ends of motor have threaded mounting
holes. Made by Unite®. Weight 9 lbs.
Item # MOT-48500
Cross references motor case number: MY1020
|
$99.95
|
48V 750W 2800 RPM
|
48 Volt 750 Watt 2800 RPM Electric Scooter Motor
48V 750W 2800RPM electric scooter motor. Powerful four brush permanent magnet
design with 100% ball bearing construction. Includes 11 tooth sprocket for #25
chain. 8.5mm x 10mm sprocket mounting area.
Different size sprockets are available for this motor. 18" long power leads.
Shaft rotation reversible by reversing power leads. Dimensions: 4.2" (106mm)
wide x 5.275" (134mm) long excluding shaft, 6-1/2" long including shaft. Shaft is 1" long and sprocket is spaced 5/8" away from front of motor.
Front and rear ends of motor have threaded mounting holes. Made by Unite®. Weight 9 lbs.
Item # MOT-48750
Cross references motor case number: MY1020
|
$99.95
|
48V 750W
2800 RPM
|
48 Volt 750 Watt Electric Scooter Motor
48V 750W 2800 RPM electric scooter motor. Powerful four brush permanent magnet design with 100% ball
bearing construction. Includes 11 tooth sprocket for #25 chain. 8.5mm x 10mm sprocket mounting area.
Different size sprockets are available for this motor. 18" long power leads. Shaft rotation reversible by
reversing power leads. Motor shaft starts at 12mm OD and is stepped down to 10mm OD with two flat spots that are 8.5mm apart where the sprocket mounts,
past the sprocket is an 8mm left hand threaded post for the nut and washer which holds the sprocket in place. Mounting bracket measures 4-3/4" x 2-7/8"
and has 4 holes that are spaced 4" x 2-1/4" apart. Dimensions: 4-1/4" outside diameter x 5-1/4" long excluding shaft, 6-1/4" long including shaft. Weight 9.2 lbs.
Made by Unite®.
Item # MOT-48750B
Cross reference numbers: ZY1020, MY1020
|
$99.95
|
48 Volt Brushless Motors
Brushless Motor Wire Connectors
|