All of our motor sprockets for MY020 and ZY1020 motors are made from hardened steel and have a black oxide finish.
For #25 Chain
9 Tooth 10mm D-Bore Sprocket for #25 Chain 7/8" OD, 8.5mm x 10mm ID. Fits 10mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2509C
$6.95
11 Tooth 10mm Double D-Bore Sprocket for #25 Chain 1" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut
and washer on end to secure sprocket in place. Item # SPR-2511C
$9.95
12 Tooth 10mm Double D-Bore Sprocket for #25 Chain 1-1/16" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with
nut and washer on end to secure sprocket in place. Item # SPR-2512E1
$9.95
13 Tooth 10mm Double D-Bore Sprocket for #25 Chain 1-1/8" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2513E1
$9.95
14 Tooth 10mm Double D-Bore Sprocket for #25 Chain 1-3/16" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with
nut and washer on end to secure sprocket in place. Item # SPR-2514E1
$9.95
For 8mm Chain
9 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut
and washer on end to secure sprocket in place.
Item # SPR-809
$9.95
10 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1-1/8" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-810
$9.95
11 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1-1/4" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-811
$9.95
12 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1-5/16" OD, 10.1mm x 8.6mm ID. Fits 10mm OD dual-flatted motor shafts with
nut and washer on end to secure sprocket in place.
Item # SPR-812E1
$9.95
13 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1-7/16" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts
with nut and washer on end to secure sprocket in place. Item # SPR-813
$9.95
15 Tooth 10mm Double D-Bore Sprocket for 8mm Chain 1-11/16" OD, 10.1mm x 8.6mm ID. Fits 10mm OD dual-flatted motor
shafts with nut and washer on end to secure sprocket in place. Item # SPR-815E1
$9.95
For #35 Chain
10 Tooth 10mm Double D-Bore Sprocket for #35 Chain 1-3/8" OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-3510
$9.95
For #410 (1/2" x 1/8") Bicycle Chain
8 Tooth 10mm Double D-Bore Sprocket for #410 (1/2"x1/8") Bicycle Chain 1-1/2" OD, 8.5mm x 10mm ID. Fits 10mm OD dual flatted motor shaft with nut
and washer on end to secure sprocket in place. Item # SPR-4101008
$14.95
9 Tooth 10mm Double D-Bore Sprocket for #410 (1/2"x1/8") Bicycle Chain 1-5/8" OD, 8.5mm x 10mm ID. Fits 10mm OD dual flatted motor shaft with nut
and washer on end to secure sprocket in place.
Item # SPR-4109C
$14.95
11 Tooth 10mm Dual D-Bore Sprocket for 1/2" x 1/8" Bicycle Chain 1-15/16" OD, 8.5mm x 10mm ID. Fits 10mm OD dual flatted motor shaft with nut
and washer on end to secure sprocket in place. Item # SPR-4101011
$14.95
For #41 and #420 Chain
9 Tooth 10mm Double D-Bore Sprocket for #41 and #420 Chain 43.5mm (~1-3/4") OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts
with nut and washer on end to secure sprocket in place. Made from hardened steel
with a black oxide finish.
Item # SPR-4209E1
$14.95
9 Tooth 10mm Double D-Bore Sprocket for #41 and #420 Chain 46mm (~1-3/4") OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts
with nut and washer on end to secure sprocket in place. Made from hardened steel
with a black oxide finish.
Item # SPR-42010E1
$14.95
11 Tooth 10mm Double D-Bore Sprocket for #41 and #420 Chain 48mm (~1-7/8") OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-42011E1
$14.95
For #428 Chain
10 Tooth 10mm Double D-Bore Sprocket for #428 Chain 46mm (~1-3/4") OD, 8.5mm x 10mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-42810C
$14.95
For 1/2" V-Belt
2 Inch OD 10mm Double D-Bore Motor Pulley for 1/2" V-Belt 10" OD, 10mm x 8.5mm ID D-bore. Works with 1/2" V-belts. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place. Made from cast iron with a black oxide finish.
Item # SPR-P200E1
$19.95
Sprocket Mounting Hardware
Nut and Washer for
8mm Left Hand Thread Motor Shafts Sprocket nut and washer set for most electric scooter motors. Fits left hand threaded
8mm motor shaft ends. Compatible with MY1016, MY1020, MY6812, and ZY1020 electric motors.
Item # SPR-NW8
