|
|
Sprockets > #25 Chain Sprockets > #25 Motor Sprockets
#25 Motor Sprockets
#25 Sprocket Fasteners
|
|
Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket nut and washer for electric scooter, pocket bike, and go kart motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8
|
$1.95
 |
|
|
Lock Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket lock nut and washer for motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8-LK
|
$2.49
|
|
|
Nut and Spacer for 6mm Left Hand Thread Motor Shafts
Sprocket nut and spacer for electric scooter motors with 6mm left hand
threaded shaft ends. Fits 6812, MY6812, and MY6812B motors with 7 tooth
sprockets.
Item # SPR-NS6
|
$1.95
|
|
|
Nut with Built-In Lock Washer for 11mm ID Keyed Motor Shaft Sprockets
Motor shaft nut for keyed 11mm ID sprockets with 4mm wide x 2mm deep keyways.
Left hand threads.
Compatible with SPR-2519G1 sprocket sold below.
Item # NUT-8RW
|
$0.95
|
|
|
Sprocket Spacer Washer for 11mm ID Keyed Motor Shaft Sprockets
11mm ID x 20mm OD x 1mm thick. Commonly used on gear motors with 11mm shafts when replacing a sprocket with a 13.75mm hub width with a sprocket that has a 9mm or 10mm hub width.
Item # HDW-11X20X1
|
$0.50
|
|
|
4mm x 4mm x 8mm Key Pin for Keyed Motor Shaft Sprockets
4mm x 4mm x 8mm key pin for sprockets with 4mm wide x 2mm deep keyways.
Compatible with SPR-2519G1 sprocket sold below.
Item # KEY-448
|
$0.95
|
|
|
3mm x 20mm Roll Pin for Chain Sprockets
3mm x 20mm roll pin for eZip, IZIP, Currie, Schwinn, Mongoose, and GT chain sprockets. Attaches
chain sprocket onto motor shaft.
Item # HDW-3MMRP
| $0.95
|
#25 Sprockets That Attach with Nut and Washer
|
|
7 Tooth 6mm D-Bore Sprocket for #25 Chain
11/16" OD, 5.1mm x 6.1mm ID. Fits 6mm OD single-flatted motor shafts with nut and
spacer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2507D1
| $6.95
|
|
|
9 Tooth 8mm D-Bore Sprocket for #25 Chain
13/16" OD, 7.1mm x 8.1mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2509D
| $6.95
|
|
|
9 Tooth 10mm Double D-Bore Sprocket for #25 Chain
7/8" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2509C
Compatible with MY1020 motors. | $6.95
|
|
|
10 Tooth 8mm D-Bore Sprocket for #25 Chain
15/16" OD, 7.1mm x 8.1mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2510D
| $7.49
|
|
|
11 Tooth 8mm D-Bore Sprocket for #25 Chain
1" OD, 7.1mm x 8.1mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2511D
| $7.95
|
|
|
11 Tooth 10mm D-Bore Sprocket for #25 Chain
1" OD, 8.6mm x 10.1mm ID. Fits 10mm OD single-flatted motor shafts with nut
and washer on end to secure sprocket in place. Made from hardened steel with a
black oxide finish.
Item # SPR-2511D2
|
$9.95
|
|
|
11 Tooth 10mm Double D-Bore Sprocket for #25 Chain
1" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut
and washer on end to secure sprocket in place. Made from hardened steel with a
black oxide finish.
Item # SPR-2511C
Compatible with MY1020 motors. |
$9.95
|
|
|
12 Tooth 8mm D-Bore Sprocket for #25 Chain
1-1/16" OD, 7.1mm x 8.1mm ID. Fits 8mm OD single-flatted motor shafts with nut
and washer on end to secure sprocket in place. Made from hardened steel with a
black oxide finish.
Item # SPR-2512D2
|
$9.95
|
|
|
12 Tooth 10mm Double D-Bore Sprocket for #25 Chain
1-1/16" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut
and washer on end to secure sprocket in place. Made from hardened steel with a
black oxide finish.
Item # SPR-2512E1
Compatible with MY1020 motors. |
$9.95
|
|
|
13 Tooth 10mm Double D-Bore Sprocket for #25 Chain
1-1/8" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut and washer on end to secure sprocket in place.
Made from hardened steel with a black oxide finish.
Item # SPR-2513E1
Compatible with MY1020 motors. |
$9.95
|
|
|
14 Tooth 10mm Double D-Bore Sprocket for #25 Chain
1-3/16" OD, 8.6mm x 10.1mm ID. Fits 10mm OD dual-flatted motor shafts with nut
and washer on end to secure sprocket in place. Made from hardened steel with a
black oxide finish.
Item # SPR-2514E1
Compatible with MY1020 motors. |
$9.95
|
|
|
19 Tooth 11mm Bore Sprocket for #25 Chain
1-5/8" OD, 11mm ID, 4mm wide x 2mm deep keyway. 9mm wide hub. For
MY1016Z, MY1016Z3, and MY1018Z gear motors.
Made from hardened steel with a black oxide finish.
Item # SPR-2519G1
|
$14.95
|
#25 Sprockets That Attach With Roll Pins
|
|
9 Tooth 8mm Bore Sprocket for #25 Chain
13/16" OD, 8mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Made from hardened steel with a black oxide finish.
Item # SPR-2509P
| $9.95
|
|
|
12 Tooth 10mm Bore Sprocket for #25 Chain
1-1/16" OD, 10mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin. Made from hardened steel with a black oxide finish.
Item # SPR-2512P
| $10.95
|
|
|
13 Tooth 10mm Bore Sprocket for #25 Chain
1-1/8" OD, 10mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Item # SPR-2513P
| $10.95
|
|
|
14 Tooth 10mm Bore Sprocket for #25 Chain
1-1/4" OD, 10mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Item # SPR-2514P
| $11.95
|
|
|
15 Tooth 10mm Bore Sprocket for #25 Chain
1-3/8" OD, 10mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Item # SPR-2515P
| $11.95
|
|
15 Tooth Freewheeling Sprocket for #25 Chain
Roller clutch sprocket with one-way bearing. Rotates freely in one
direction; fixed in other direction. 15 tooth sprocket for #25 chain. Fits 8mm
shaft with 10mm collar. 3mm through hole for retention pin. one 3mm x 20mm roll
pin is included (not pictured). Sprocket OD: 34mm. Overall length of assembly: 29mm. Made from hardened steel with a black oxide finish.
Item # SPR-2515F |
$24.95
|
#25 Sprockets That Attach With End Bolts
#25 Sprockets That Attach With Set Screws
|
|
9 Tooth 8mm Bore Sprocket for #25 Chain
13/16" OD, 8mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2509A
|
$9.95
|
|
|
10 Tooth 8mm Bore Sprocket for #25 Chain
15/16" OD, 8mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2510A
|
$9.95
|
|
|
10 Tooth 10mm Bore Sprocket for #25 Chain
15/16" OD, 10mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2510B
|
$9.95
|
|
|
11 Tooth 8mm Bore Sprocket for #25 Chain
1" OD, 8mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2511A
|
$9.95
|
|
|
11 Tooth 10mm Bore Sprocket for #25 Chain
1" OD, 10mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2511B
|
$9.95
|
|
|
12 Tooth 8mm Bore Sprocket for #25 Chain
1-1/16" OD, 8mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2512A
|
$9.95
|
|
|
12 Tooth 10mm Bore Sprocket for #25 Chain
1-1/16" OD, 10mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2512B
|
$9.95
|
|
|
12 Tooth 12mm Bore Sprocket for #25 Chain
1-1/16" OD, 12mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2512C
|
$9.95
|
|
|
13 Tooth 8mm Bore Sprocket for #25 Chain
1-1/8" OD, 8mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2513A
|
$9.95
|
|
|
13 Tooth 10mm Bore Sprocket for #25 Chain
1-1/8" OD, 10mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2513B
|
$9.95
|
|
|
13 Tooth 12mm Bore Sprocket for #25 Chain
1-1/8" OD, 12mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2513C
|
$9.95
|
|
|
14 Tooth 8mm Bore Sprocket for #25 Chain
1-1/4" OD, 8mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2514A
|
$9.95
|
|
|
14 Tooth 10mm Bore Sprocket for #25 Chain
1-1/4" OD, 10mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2514B
|
$9.95
|
|
|
14 Tooth 12mm Bore Sprocket for #25 Chain
1-1/4" OD, 12mm ID. Two set screws.
Made from hardened steel with a black oxide finish.
Item # SPR-2514C
|
$9.95
|
|
14 Tooth 1/2" Bore Sprocket for #25 Chain
1-1/4" OD, 1/2" ID. Two set screws. Made from hardened steel with
a black oxide finish.
Item # SPR-2514H |
$9.95
|
|
|
15 Tooth 8mm Bore Sprocket for #25 Chain
1-3/8" OD, 8mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2515A
|
$9.95
|
|
|
15 Tooth 10mm Bore Sprocket for #25 Chain
1-3/8" OD, 10mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2515B
|
$9.95
|
|
|
15 Tooth 12mm Bore Sprocket for #25 Chain
1-3/8" OD, 12mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2515C
|
$9.95
|
|
|
16 Tooth 8mm Bore Sprocket for #25 Chain
1-13/32" OD, 8mm ID. Two set screws. Made from hardened steel with a
black oxide finish.
Item # SPR-2516A
| $9.95
|
|
|
16 Tooth 1/2" Bore Sprocket for #25 Chain
1-13/32" OD, 1/2" ID. Two set screws. Made from hardened steel with
a black oxide finish.
Item # SPR-2516H |
$10.95
|
#25 Sprockets With Gear Reduction Transmissions
Related Parts: #25 Rear Wheel Sprockets
|
