|
|
 MY6812 Motors
Chain sprockets and belt cogs are not interchangeable. If the motor has a chain sprocket then only chain sprockets will fit on it, and if the motor has a belt cog then only belt cogs will fit on it.
24 Volt MY6812 Motors
|
24V 100W
for chain drive scooters
|
24 Volt 100 Watt Electric Scooter Motor
24V 100W 2500 RPM electric scooter motor. Powerful two brush permanent
magnet design with 100% ball bearing construction.
Includes 9 tooth sprocket for #25 chain. 12" long power
leads with terminal connectors. Shaft rotation reversible
by reversing power leads. Dimensions: 2-5/8" wide x 3-7/8"
long excluding shaft, 4-7/8" long including shaft. Made by Unite®.
Item # MOT-24100
Cross reference motor case number: MY6812 |
$29.95
|
|
24V 100W
for belt drive scooters
|
24 Volt 100 Watt Electric Scooter Motor
24V 100W 2500 RPM electric scooter motor. Powerful two brush permanent magnet design with
100% ball bearing construction. Includes 16 tooth belt
cog for 3m pitch drive belts. 15" long power leads with
terminal connectors. Shaft rotation reversible by reversing
power leads. Dimensions: 2-5/8" wide x 3-1/2" long excluding
shaft, 4-1/2" long including shaft. Made by Unite®.
Item # MOT-24100B
Cross reference motor case number: MY6812 |
$29.95
|
|
24V 150W
for chain drive scooters
|
24 Volt 150 Watt Electric Scooter Motor with Chain Sprocket
24V 150W 2500 RPM electric scooter motor. Powerful two brush permanent
magnet design with 100% ball bearing construction.
Includes 9-tooth chain sprocket. 19" long power
leads with 1/4" wide female terminals.
Shaft rotation reversible by reversing power leads. Dimensions: 2-3/4" wide x
4"
long excluding shaft, 5-1/2" long including shaft. Made by Unite®.
Item # MOT-24150
Cross reference motor case number: MY6812 |
$39.95
|
|
24V 150W
for belt drive scooters
|
24 Volt 150 Watt Electric Scooter Motor with Belt Sprocket
24V 150W 2500 RPM electric scooter motor. Powerful two brush permanent
magnet design with 100% ball bearing construction.
Includes 19-tooth belt cog for 3mm drive belts. 12" long power
leads with 1/4" wide terminals with pre-installed connector.
Shaft rotation reversible by reversing power leads. Dimensions: 2-3/4" wide x
4"
long excluding shaft, 5-1/2" long including shaft. Made by Unite®.
Item # MOT-24150B
Cross reference motor case number: MY6812 |
$39.95
|
MY6812 Motor Sprockets
MY6812 Motor Sprockets for #25 Chain
|
|
9 Tooth 8mm D-Bore Sprocket for #25 Chain
13/16" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2509D
| $6.95
|
|
|
10 Tooth 8mm D-Bore Sprocket for #25 Chain
7/8" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2510D
| $7.49
|
|
|
11 Tooth 8mm D-Bore Sprocket for #25 Chain
1" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2511D
| $7.95
|
MY6812 Motor Sprocket Mounting
Hardware
|
|
Nut and Washer for
8mm Left Hand Thread Motor Shafts
Sprocket nut and washer set for most electric scooter motors. Fits left hand threaded
8mm motor shaft ends. Compatible with MY1016, MY1020, MY6812, and ZY1020 electric motors.
Item # SPR-NW8
|
$1.95
|
|
|
Lock Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket lock nut and washer for motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8-LK
|
$2.49
|
MY6812 Motor Belt Cogs
|
|
13 Tooth D-Bore Drive Belt Cog for 5M-15 Belts (8mm Bore)
1" OD, 8mm x 7mm ID D-bore. Works with 5mm tooth pitch x 15mm wide HTD drive belts. Compatible
with belt drive MY1016 and MY1018 electric scooter and bike motors with 8mm
shafts.
Item # SPR-COG13D2
|
$9.95
|
|
|
16 Tooth D-Bore Drive Belt Cog for 3M-15 Belts (8mm Bore)
3/4" OD, 8mm x 7mm ID D-bore. Works with 3mm tooth pitch x 15mm wide
HTD drive belts. Compatible with belt
drive MY1016 and MY1018 electric scooter and bike motors with 8mm shafts.
Item # SPR-COG16D3M |
$9.95
|
|
