|
MY1016 Motors
Chain sprockets and belt cogs are not interchangeable. If the motor has a chain sprocket then only chain sprockets will fit on it, and if the motor has a belt cog then only belt cogs will fit on it.
24 Volt MY1016 Motors
24V 200W
for belt drive scooters
|
24 Volt 200 Watt Electric Scooter Motor
24V 200W 2750 RPM electric
scooter motor. Powerful four brush permanent
magnet design with 100% ball bearing
construction. Includes 13 tooth drive belt cog for
5mm pitch drive belts. 17" long power leads. The shaft rotation is reversible
by reversing power leads. Dimensions: 4" wide x
3-1/4" long excluding shaft, 4-1/4" long including
shaft. Mounting bracket measures 4-3/8" x 2-1/4"
with 4 threaded mounting holes. Weight 3.85 lbs. Made by Unite®.
Item # MOT-24200 |
$49.95
|
36 Volt MY1016 Motors
MY1016 Motor Sprockets
MY1016 Motor Sprockets for #25 Chain
|
9 Tooth 8mm D-Bore Sprocket for #25 Chain
13/16" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2509D
| $6.95
|
|
10 Tooth 8mm D-Bore Sprocket for #25 Chain
7/8" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2510D
| $7.49
|
|
11 Tooth 8mm D-Bore Sprocket for #25 Chain
1" OD, 7mm x 8mm ID. Fits 8mm OD single-flatted motor shafts with nut and washer on end to secure sprocket in place.
Item # SPR-2511D
| $7.95
|
MY1016 Motor Sprocket Mounting
Hardware
|
Nut and Washer for
8mm Left Hand Thread Motor Shafts
Sprocket nut and washer set for most electric scooter motors. Fits left hand threaded
8mm motor shaft ends. Compatible with MY1016, MY1020, MY6812, and ZY1020 electric motors.
Item # SPR-NW8
|
$1.95
|
|
Lock Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket lock nut and washer for motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets. Item # SPR-NW8-LK
|
$2.49
|
MY1016 Motor Belt Cogs
|
13 Tooth D-Bore Drive Belt Cog for 5M-15 Belts (10mm Bore)
1" OD, 10mm x 8mm ID D-bore. Works with 5mm tooth pitch x 15mm wide HTD
drive belts. Item # SPR-COG13D |
$9.95
|
|