|
|
Sprockets > Sprocket Hardware
Sprocket Hardware
|
|
Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket nut and washer for motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8
|
$1.95
 |
|
|
Lock Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket lock nut and washer for motors with 8mm left hand threaded
shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and
MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8-LK
|
$2.49
|
|
|
Nut and Spacer for 6mm Left Hand Thread Motor Shafts
Sprocket nut and spacer for motors with 6mm left hand
threaded shaft ends. Fits 6812, MY6812, and MY6812B motors with 7 tooth
sprockets.
Item # SPR-NS6
|
$1.95
|
|
|
Nut with Built-In Lock Washer for Keyed Motor Shaft Sprockets
Motor shaft nut for keyed motor shaft sprockets with 4mm wide x 2mm deep keyway.
Compatible with
MY1016Z, MY1016Z3, and MY1018Z gear motors.
Item # NUT-8RW
|
$0.95
|
|
|
4mm x 4mm x 8mm Key Pin for Keyed Motor Shaft Sprockets
4mm x 4mm x 8mm key pin for sprockets with 4mm wide x 2mm deep keyway.
Compatible with MY1018Z and MY1016Z3 gear motors.
Item # KEY-448
|
$0.95
|
|
|
3mm x 20mm Roll Pin for Chain Sprockets
3mm x 20mm roll pin for eZip, IZIP, Currie, Schwinn, Mongoose, and GT chain sprockets. Attaches
the chain sprocket onto motor shaft.
Item # HDW-3MMRP
| $0.95
|
|
|
Sprocket Mounting Bolts and Locknuts for 5-Hole Freewheels
Set of five quantity M5x0.8 x 14mm long bolts and M5x0.8 locknuts. Compatible
with F5 sprockets and freewheels.
Item # HDW-200
|
$2.95
|
|
