|
Switches
> Reverse Switches
Reverse Switches
Reverse Switches
The reverse switches listed on this page are wired directly between the controller and the motor and are designed for use with brushed motor controllers that do not have a built-in reverse function.
For controllers with a built-in reverse function these switches could still be used however their stop or neutral positions will not function and the motor will run forward when the switch is in the forward and stop or neutral positions.
For controllers with a built-in reverse function a smaller on/off switch could be used for the reverse switch such as the many of the switches listed on our Power Switches Page and
Handlebar Switches Page.
|
Heavy Duty Motor Reversing Switch
Heavy-duty motor reversing switch for electric cars, golf carts, ATVs, quads,
go-karts, rickshaws, small work trucks and other small to medium size electric vehicles. The dimensions of
this switch including the handle are 5" high x 3" wide x 4" deep. Three position
switch has reverse (left), neutral (center), and forward (right) positions.
Selector handle is removable for
panel mount installation. Wire terminal mounting screws are 5mm and work with #10 ring terminals.
This is the same type of forward/reverse switch found on many electric golf
carts, rickshaws, and work trucks. Rated for DC motors 5000 Watts and under. Wiring directions
and mounting information for this switch are available below.
Item # SWT-720
|
$21.95
|
|
Heavy Duty Motor Reversing Switch
Heavy-duty motor reversing switch for electric cars, golf carts, ATVs, quads,
go-karts, rickshaws, small work trucks and other small to medium size electric vehicles. The dimensions of
this switch including the handle are 4.75" high x 2.8" wide x 4" deep. Three position
switch has reverse (left), neutral (center), and forward (right) positions.
Selector handle is removable for
panel mount installation. Wire terminal mounting screws are 5mm and work with #10 ring terminals.
This is the same type of forward/reverse switch found on many electric golf
carts, rickshaws, and work trucks. Rated for DC motors 5000 Watts and under. Wiring directions
and mounting information for this switch are available below.
Item # SWT-722
|
$17.95
|
Reverse Switch Mounting Hardware
Reverse Switch Wiring Terminals
|
Yellow Insulated #10 Ring Terminal Connector for 10-12
Gauge Wire (For SWT-720)
Crimp-on insulated ring terminal connector for 12-10 gauge wire. Ring has 5.3mm ID and accepts #10 or 5mm stud, machine screw, or bolt.
Item # CNX-16 |
$.10
|
|
Blue Insulated #10 Ring Terminal Connector for 14-16 Gauge Wire (For SWT-720)
Crimp-on insulated ring terminal connector for 16-14 gauge wire. Ring
has 5.3mm ID and accepts 5mm or #10 stud, machine screw, or bolt.
Item # CNX-26 |
$.10
|
|
Yellow Insulated 1/4" Ring Terminal Connector for 10-12 Gauge Wire (For SWT-728)
Crimp-on insulated ring terminal connector for 12-10 gauge wire. Ring has 6.4mm ID and accepts 1/4" or 6mm stud, machine screw, or bolt.
Item # CNX-17 |
$.10
|
|
Blue Insulated 1/4" Ring Terminal Connector for 14-16 Gauge Wire (For SWT-728)
Crimp-on insulated ring terminal connector for 16-14 gauge wire. Ring
has 6.4mm ID and accepts 1/4" or 6mm stud, machine screw, or bolt.
Item # CNX-27 |
$.10
|
|