Kit Selection Guide

Electric Bar Stool Racer Kits

All Links Open In New Tabs or Windows

Step 1: Determine what rear wheels and axle the project will have. If the project already has rear wheels and axle then you are all set and just need to measure the wheel's diameter (distance from bottom to top of the tire) to go to step 2. If the project does not yet have rear wheels and axle then that part of the project will need to be sorted out before going to step 2. If you are starting from scratch then go-kart wheels, axles, and axle parts are most commonly used for these types of projects and these can be obtained through online go-kart parts stores.

Step 2: Determine the motor power requirement, gear ratio, and sprocket sizes using the Drivetrain Parts Selection Guide

Step 3: Determine the Voltage of the required motor by looking at the available kits and then estimate the battery pack Ah rating using the Battery Pack Ride Time Calculator

Step 4: Use the worksheet below to record the calculated and estimated parameters and use the worksheet to narrow down which kit and sprockets to use.

Step 5: Browse for the right kit using out Kits Page or search for the right kit using our Search Page.

Step 6: If you found the perfect kit for your project however need it with a smaller or larger battery pack, different style throttle or switch, or with any other changes, then Create a Support Ticket to request a new version of the kit.