|
GT Scooter Parts > GT Shockwave Electric Scooter Parts
GT® Shockwave Electric Scooter Parts
|
|
Version with Brushless Motor |
Version with Brushed Motor |
Throttles and Motor Conversion Kits for GT Shockwave Scooters with Brushless Motors Brushless motors have
a built-in speed controller and two or three connectors.
Throttles, Controllers, and Motors for GT Shockwave Scooters with Brushed Motors Brushed motors have one connector
and a separate speed controller located under the footplate.
|
3 Wire Throttle with Female Connector for GT® Shockwave Electric Scooter
3 wire twist throttle with female connector for the GT® Shockwave electric scooter
with brushed motor.
Item # THR-300
If the original throttle has a male connector then item # CTE-ADAPTER2 listed below will need to be purchased along with this throttle.
|
$19.95
|
|
Speed Controller for GT® Shockwave Electric Scooter (For 3 Wire Throttle)
Replacement speed controller for GT® Shockwave electric scooter with brushed motor. 3 wire throttle connector.
For throttles with female connector. If you have a throttle with male connector
order item # SPD-SD300F sold below. Item # SPD-SD300
Some scooters have controllers with 3 or 4 plugs instead of 5 plugs.
This controller has 5 plugs however it replaces controllers with 3 or 4
plugs. The white plug with a single red wire and white plug with white and black
wires going to it do not need to be plugged into anything
in order for the controller to operate.
|
$64.95
|
|
Speed Controller for GT® Shockwave Electric Scooter (For 3 Wire Throttle)
Replacement speed controller for GT® Shockwave electric scooter with brushed motor. 3 wire throttle connector.
Includes adapter for throttles with male connector. Replaces
CT-102C3
controllers. Item # SPD-SD300F
Some scooters have controllers with 3 or 4 plugs instead of 5 plugs.
This controller has 5 plugs however it replaces controllers with 3 or 4
plugs. The white plug with a single red wire and white plug with white and black
wires going to it do not need to be plugged into anything
in order for the controller to operate.
|
$71.95
|
|
Motor with 11 Tooth Sprocket for GT® Shockwave Electric Scooter
Motor with 11 tooth sprocket for the GT® Shockwave electric scooter with brushed motor.
Item # MOT-SD156
Compare the shape or count the number of the teeth of the original motor's sprocket to determine if it has an 11 or 15 tooth sprocket.
|
$99.95
|
|
Motor with 15 Tooth Freewheel Sprocket for GT® Shockwave Electric Scooter
Motor with 15 tooth freewheel sprocket for the GT® Shockwave electric scooter
with brushed motor.Item # MOT-SD156FW
Compare the shape or count the number of the teeth of the original motor's sprocket to determine if it has an 11 or 15 tooth sprocket.
|
$99.95
|
Parts for all GT Shockwave scooters.
BAT-2410PK
|
Battery Pack with Case and Wiring Harness for GT® Shockwave Electric Scooter
Plug-and-play battery pack for the GT® Shockwave electric scooter. Includes two pre-wired batteries, heavy-duty woven nylon zippered soft case with built-in handle, and pre-installed wiring harness. Fully assembled and ready to use. Includes 12 month battery replacement warranty.
Warranty Details
Item # BAT-2410PK
|
$99.95
|
CNX-BA075
CTE-B2410
CNX-BA0574
CHR-24V1.6AXLR
CHR-C24V1.5AXLR
CHR-24V3AXLR
|
Quick-Charge Battery Charger for GT® Shockwave Electric Scooter
Quick-charge battery charger for the GT® Shockwave electric scooter. Charger rating: 24 Volt, 3 Amp. Recharges the battery pack in around 1/2 the time that it takes the original 1.5 Amp charger.
Item # CHR-24V3AXLR
|
$49.95
|
CHR-C24V4AXLR
|
Main Wiring Harness for GT® Shockwave Electric Scooter
Main wiring harness with fuse for the GT® Shockwave electric scooter.
Compatible with charger ports that have two wires. If your scooter has a charger
port with three wires then purchase the CNX-XLR14 charger port sold below to use
with this wiring harness.
Installation Directions
Item # CNX-BA05604 |
$39.95
|
|
Charger Port for GT® Shockwave Electric Scooter
Battery charger port with two wires and two terminal connector for the GT®
Shockwave electric scooter.
Item # CNX-XLR14 |
$7.95
|
|
Fuse for GT® Shockwave Electric Scooter Fuse for the GT®
Shockwave electric scooter. Fuse
rating: 40 Amp Item # FUS-ATO40 |
$.95
|
Tires and Tubes 12-1/2x2-1/4
TIR-1250
TIR-1251
TUB-125
|
Tube for GT® Shockwave Electric Scooter
Standard-duty tube for the GT® Shockwave electric scooter. Tube size 12-1/2x2-1/4.
Item # TUB-125 |
$3.95
|
TUB-125BV
|
Tube with Bent Valve Stem for GT® Shockwave Electric Scooter
Standard-duty tube with bent valve stem for the GT® Shockwave electric scooter. Tube size 12-1/2x2-1/4.
Item # TUB-125BV |
$7.95
|
TUB-125HD
|
Heavy-Duty Tube for GT® Shockwave Electric Scooter
Heavy-duty tube for the GT® Shockwave electric scooter. Three times heavier than our standard-duty tubes. Tube size 12-1/2x2-1/4.
Item # TUB-125HD |
$9.95
|
|
Fixed Motor Sprocket for GT® Shockwave Electric Scooter
11 tooth fixed motor sprocket for the GT® Shockwave electric scooter.
Item # SPR-2511PP
11 tooth fixed and 15 tooth freewheel motor sprockets are not interchangeable
with each other. The motor sprocket must be replaced with the same one that is on the motor.
|
$10.95
|
|
Freewheel Motor Sprocket for GT® Shockwave Electric Scooter
15 tooth freewheel motor sprocket for the GT® Shockwave electric scooter.
Item # SPR-2515F
15 tooth freewheel and 11 tooth fixed motor sprockets are not interchangeable
with each other. The motor sprocket must be replaced with the same one that is on the motor.
|
$24.95
|
SPR-2589F
|
Upgrade Rear Sprocket for GT® Shockwave Electric Scooter
Upgrade rear wheel sprocket with freewheel for the GT® Shockwave electric scooter. Directly replaces and upgrades the SPR-2590 sprocket listed below.
This upgrade sprocket has a freewheel that provides less rolling resistance when coasting for improved range and ride time plus makes it easier to push or kick the scooter forward when not using the motor.
Item # SPR-2589F |
$39.95
|
SPR-2590
|
Rear Sprocket for GT® Shockwave Electric Scooter
Original rear wheel sprocket for the GT® Shockwave electric scooter.
We have an upgrade rear sprocket with freewheel listed above that provides improved range and performance compared to this original sprocket.
Item # SPR-2590 |
$59.95
|
CURRIE-AXLEHARDWARE
CTE-24610
|
Axle Nut for GT® Shockwave Electric Scooter
Front and rear wheel axle nut for the GT® Shockwave electric scooter.
Item # CTE-24610
|
$1.95
|
CTE-24612
|
Axle Lock Nut for GT® Shockwave Electric Scooter
Front and rear wheel axle lock nut for the GT® Shockwave electric scooter.
Item # CTE-24612
|
$1.49
|
CURRIE-SEATPOSTS
SPT-150
|
Steel Seat Post for GT® Shockwave Electric Scooter
Steel seat post with chrome finish for the GT® Shockwave electric scooter.
Item # SPT-150 |
$8.95
|
SPT-161
|
Aluminum Seat Post for GT® Shockwave Electric Scooter
Lightweight aluminum alloy seat post for the GT® Shockwave electric scooter.
Item # SPT-161 |
$9.95
|
CURRIE-SEATS
SET-185
SET-249
SET-200
LIT-140
|
5000 Lumen 7 LED Ultra-Bright Headlight for GT® Shockwave Electric Scooter
Super bright 5000 lumen rechargeable LED headlight set for the GT® Shockwave electric scooter.
Machined aluminum and glass headlight construction with premium build quality. Lighted push button switch on back of light
activates three different power modes: normal, high, and flashing. Normal power mode is bright and suitable
for most riding conditions. High power mode is super bright and suitable for higher speed riding and
off-road trails. In flashing mode this light quickly blinks on and off. Includes adjustable headband
to optionally use for wearing on your head instead of installing on the
handlebar, 5000 lumen seven LED headlight, handlebar and headband rubber mounting bands, 110-240VAC universal
battery charger, and a 9600mAh 8.4 Volt rechargeable lithium-ion battery in a black nylon carry case with Velcro mounting straps.
The battery lasts around 3 hours on low mode and 2 hours on high mode and takes 1-5 hours to fully recharge depending on how long the light was on for.
Installation Directions
Item # LIT-140 |
$29.95
|
BEL-300
|
Safety Warning Bell for GT® Shockwave Electric Scooter
Safety warning bell.Pleasant sounding and attention grabbing chime bell sound lets others know that you are on the road in a friendly yet effective way.
Item # BEL-300 |
$2.95
|
BEL-360
|
Safety Warning Bell With Compass for GT® Shockwave Electric Scooter
Compass bell for the GT® Shockwave electric scooter. Pleasant sounding and attention grabbing chime bell sound. Easy to view real magnetic compass. Easy to install design.
Item # BEL-360 |
$3.95
|
VXT-160
VXT-714
GSL-4OZ
|
Green Slide® Chain Lube for GT® Shockwave Electric Scooter
Green Slide® safe and biodegradable chain lube. The perfect lube for electric scooters and bikes. Made from highly modified tree and plant oils with all natural cling and anti-oxidation additives.
4 fluid ounce / 120 ml bottle. More Information
Item # GSL-4OZ |
$4.95
|
TIR-SL8
|