|
Sprockets > Freewheel to Motor Adapters
Freewheels to Motor Adapters
Freewheel to Motor Adapters
We carry 11mm Shaft Gear Motors which the adapters and sprockets on this page are compatible with.
We carry Pre-Made Sprockets with F4 and F5 mounting patterns that fit the freewheel clutches on this page.
We also sell Custom-Made Sprockets with F4 and F5 mounting patterns that fit the freewheels on this page.
One-Piece Freewheel Motor Sprockets
|
12 Tooth Freewheel Sprocket with 11mm Bore for 1/2"x1/8" and 1/2"x3/16"
Bicycle Chain Motor shaft must rotate clockwise to use this sprocket. 1-15/16" (50mm) OD,
11mm ID, 4mm wide x 2mm deep keyway. Works with 1/2"x1/8" (#410) and 1/2"x3/16"
(#415) bicycle chain (with #415 chain there will be around 1/16" of side-to-side play between the chain and sprocket).
Compatible with 11mm Shaft Gear Motors
Item # SPR-4101211FW
|
$21.95
|
Freewheel to Motor Adapters
|
Freewheel to Motor Adapter with M35x1.00 Right Hand Threads
Freewheel adapter with M35x1.00 right hand (clockwise) threads. Freewheel
engages when the motor's shaft rotates clockwise. 11mm ID, 4mm wide x 2mm deep
keyway. 10mm wide mounting hub. Made from yellow zinc plated steel.
Compatible with 11mm Shaft Gear Motors
Installation Example
Item # FWM-ADAPTER25
|
$19.95
|
Freewheel to Motor Adapter Mounting Hardware
|
4mm x 4mm x 8mm Key Pin for Keyed Motor Shaft Sprockets
4mm x 4mm x 8mm key pin for sprockets with 4mm wide x 2mm deep keyways sold above.
Compatible with 11mm shaft gear motors.
Item # KEY-448
|
$0.95
|
|
Nut with Built-In Lock Washer for Keyed Motor Shaft Sprockets
Motor shaft nut for keyed motor shaft sprockets with 4mm wide x 2mm deep keyways sold above.
Compatible with 11mm shaft gear gear motors. Item # NUT-8RW
|
$0.95
|
Freewheel Sprockets
|
Freewheel and Brake to Threaded Wheel Hub Spacer with 35mm ID
Freewheel and brake to threaded wheel hub spacer. Works with both M35x1.00 and 1.375"
x 24 TPI freewheels. 35mm ID, 42mm OD, 2.5mm thick. Made from yellow zinc plated steel.
Item # HDW-3525
Installation Example
|
$1.95
|
Freewheel Clutches
|
Freewheel and Brake to Threaded Wheel Hub Spacer with 35mm ID
Freewheel and brake to threaded wheel hub spacer. Works with both M35x1.00 and 1.375"
x 24 TPI freewheels. 35mm ID, 42mm OD, 2.5mm thick. Made from yellow zinc plated steel.
Item # HDW-3525
Installation Example
|
$1.95
|
Freewheel Tools
|