Parts  Repair Help  Contact Us  Shopping Cart  My Account  Projects 

Hardware / Brakes > Brake Hardware

Brake Hardware

Browse for hardware by vehicle make and model.


Mounting Hardware for Band Brakes
Mounting hardware parts kit for electric scooter and bike band brakes.
Item # HDW-188
$3.95


6mm Brake Cable Stopper
Nickel-plated steel adjustable brake cable stopper for most caliper brakes. Fits 6mm (~1/4") ID hole.

Mounting Hole Dimensions
Item # BRK-224

$.95


Small Brake Cable Stopper
Nickel-plated steel adjustable brake cable stopper for most caliper brakes. Fits 6mm (~1/4") ID hole with two flat spots measuring 5mm across.

Mounting Hole Dimensions
Item # BRK-225

$.95


Large Brake Cable Stopper
Nickel-plated steel adjustable brake cable stopper for most band brakes. Fits 7mm (~5/16") ID hole with two flat spots measuring 6mm across.

Mounting Hole Dimensions
Item # BRK-226

$.95


Brake Cable Adjuster
Nickel plated steel brake cable adjusting barrel with adjustment stop nut. 25mm long x 8mm wide overall measurements. Fits brake cable ends up to 6mm wide. Threaded area of adjuster is 18mm long. M6 x 1.00 threads (6mm OD x 1mm pitch).
Item # BRK-227
$0.95


Brake Cable Adjuster
Aluminum brake cable adjusting barrel with adjustment stop nut. 25mm long x 9mm wide overall measurements not including the stop nut. Fits brake cable ends up to 6mm wide. Threaded area is 14mm long. M7 x 1.00 threads (7mm OD x 1mm pitch).
Item # BRK-229
$0.95


Brake Cable Adjuster with Mounting Boss
Nickel plated steel brake cable adjusting barrel with mounting nut. Most commonly used on caliper type brakes. Fits brake cable housing ends up to 6mm wide. Brake cable adjuster has M6 x 1.00 threads (6mm OD x 1mm pitch). Mounting boss fits into 6mm mounting hole.
Item # BRK-228
$0.95

Brake Cable End Cap
Crimp-on aluminum brake cable end cap. Prevents brake cables from unraveling on end. Makes brake cable installations look neat and professional.
Item # BRK-205
$.20

Brake Cable Housing Ferrule
Crimp-on Nickel plated steel brake cable housing ferrule.
Item # BRK-204
$.20


V-Brake ABS Brake Power Modulator
ABS brake power modulator with noodle for V-brakes. Aluminum alloy power modulator with stainless steel noodle. Helps prevent wheel lockup during light to moderate braking. During hard braking the effective range of the modulator can be exceeded resulting in normal braking operation including locking up of the wheel for emergency braking.
Item # BRK-320
$1.49


Brake Cable Stopper
Zinc-plated steel adjustable cable stopper / cable clamp. Works with cables up to 2.5mm OD.
Item # BRK-214
$.95


Brake Cable Stopper
Zinc-plated steel adjustable cable stopper / cable clamp. Works with cables up to 3mm OD.
Item # BRK-215
$.95


Brake Cable Stopper
Zinc-plated steel adjustable cable stopper / cable clamp. Works with cables up to 2.5mm OD.
Item # BRK-216
$.95


Brake Cable Stopper
Zinc-plated steel adjustable cable stopper / cable clamp.
Item # BRK-220
$1.59


Cable Clamp with 0.122 Inch (3.1mm) ID
Steel cable clamp. Connects two cables together. 0.122" (3.1mm) ID x 0.315" (8mm) OD. Made from nickel plated steel. Includes socket set screw. Set screw requires 1.5mm Allen (hex) wrench to tighten and loosen.
Item # CCL-122
$0.85


Cable Clamp with 0.161 Inch (4.1mm) ID
Steel cable clamp. Connects two cables together. 0.161" (4.1mm) ID x 0.35" (9mm) OD. Made from nickel plated steel. Includes socket set screw. Set screw requires 1.5mm Allen (hex) wrench to tighten and loosen.
Item # CCL-161
$0.95


1.5mm Allen (Hex) Wrench
1.5mm Allen wrench. This type of wrench is also called a hex key. Made from hardened steel. The overall dimensions of this wrench are 1-7/8" long x 3/4' wide x 1.5mm thick.
Item # WRN-A1.5MM
$0.25


Cotter Pin for BRK-710 Series Disc Brake Calipers
Cotter pin for BRK-710 series disc brake calipers plus many others. 3mm OD x 25mm long measured from bottom of head to end of shortest leg. 
Item # BRK-710C
$.50


Set of 2 Disc Brake Caliper Mounting Bolts
Set of two disc brake caliper mounting bolts with built-in washer and pre-applied blue threadlock. Compatible with all of the mechanical disc brake calipers sold on this page.

5mm Hex (Allen) Bolt Head

Pre-Applied Blue Threadlock

6mm (M6x1.0) Diameter Threads

18mm Long Threads

Made from Hardened High Strength Steel

Black Powder Coated Anti-Corrosion Finish

Item # BRK-794

$1.00


Disc Brake Caliper Mounting Bolt Tool
Disc brake caliper mounting bolt tool. This is a standard 5mm Allen (hex) wrench. Compatible with BRK-794 mounting bolts sold above.

5mm Hex (Allen) Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58

Item # WRN-A5MM
$0.50


Set of Six 5mm Disc Brake Rotor Mounting Bolts
Set of six 5mm disc brake rotor mounting bolts. These bolts have pre-applied blue threadlock on them to securely keep them in place.

T25 Bolt Head

Pre-Applied Blue Threadlock

5mm (M5x0.6) Diameter Threads

10mm Long Threads

Made from Hardened High Strength Steel

Black Powder Coated Anti-Corrosion Finish

Item # BRK-590
$1.00


T25 Disc Brake Rotor Mounting Bolt Tool
Disc brake rotor mounting bolt tool with dual T25 ends. Made from hardened high strength chrome-vanadium steel. 

T25 Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58

Item # BRK-593
$1.00


Set of Six 5mm Nickel-Plated Disc Brake Rotor Mounting Bolts
Set of six 5mm disc brake rotor mounting bolts.

3mm Hex (Allen) Bolt Head

5mm (M6x0.6) Diameter Threads

12mm Long Threads

Made from Hardened High Strength 10.9 Grade Steel

Nickel-Plated Anti-Corrosion Finish

Item # BRK-591
$1.00


Set of Three 6mm Disc Brake Rotor Mounting Bolts
Set of three 6mm disc brake rotor mounting bolts.

4mm Hex (Allen) Bolt Head

6mm (M6x1.0) Diameter Threads

16mm Long Threads

Made from Hardened High Strength 10.9 Grade Steel

Nickel-Plated Anti-Corrosion Finish

Item # BRK-595
$1.00


Set of Six 6mm Disc Brake Rotor Mounting Bolts
Set of three 6mm disc brake rotor mounting bolts.

4mm Hex (Allen) Bolt Head

6mm (M6x1.0) Diameter Threads

16mm Long Threads

Made from Grade 304 Stainless Steel

Item # BRK-596
$1.95


4mm Hex (Allen) Disc Brake Rotor Mounting Bolt Tool
Disc brake rotor mounting bolt tool with 4mm hex (Allen) ends. Made from hardened high strength chrome-vanadium steel.

4mm Hex (Allen) Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58
Item # BRK-598

$0.50



"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Store Polices | Electric Scooter Repair Help | Dealer Discounts | Feedback | About Us

 

We Ship Internationally

             
Copyright© 2002-2020 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.