Parts  Repair Help  Contact Us  Shopping Cart  My Account  Projects 

Switches > Battery Disconnect Switches

Battery Disconnect Switches

Browse for battery disconnect switches by vehicle make and model.

Battery Disconnect Switch with Removable key

Battery Disconnect Switch with Removable Key and Dust Cover
Heavy-duty battery disconnect switch with removable key and dust cover. Made from super tough glass-reinforced plastic. Key is not removable when switch is on and is removable when switch is off. Isolates the battery pack from the speed controller during transit and storage or in the event of a serious electrical fault or speed controller malfunction. Can also be use as a power switch with speed controllers that require a power switch between themselves and the battery pack. Two 10mm OD copper terminal power posts with zinc plated nuts and washers. Two 5.2mm ID panel mounting holes with machined brass inserts. Mounts with two #10 or 5mm machine screws.

Rated Voltage: 12-60 Volts DC

Rated Current: 150 Amps
Item # SWT-705

$9.95

Disconnect Switch

Battery Disconnect Switch
Heavy-duty battery disconnect switch with permanently attached handle. Isolates the battery pack from the speed controller during transit and storage or in the event of a serious electrical fault or speed controller malfunction. Can also be use as a power switch with speed controllers that require a power switch between themselves and the battery pack. The red plastic handle is bolted onto the switch base and is removable for installation. Two 10mm OD copper terminal power posts with brass nuts and washers. Two 6.2mm ID panel mounting holes. Mounts with two 1/4" or 6mm machine screws.

Rated Voltage: 12-60 Volts DC

Rated Current: 200 Amps
Item # SWT-700

$14.95

10mm ID Ring Terminal for 10-12 Gauge Wire

Yellow Insulated 3/8" Ring Terminal Connector
Crimp-on insulated ring terminal connector for 10-12 gauge wire. Ring has 10.5mm ID and accepts 3/8" or 10mm stud, machine screw, or bolt.
Item # CNX-19
$.15


Set of Two 5mm x 12mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts (For SWT-705)
Set of two 5mm OD x 12mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm. For mounting reverse switch item # SWT-705 onto panels up to 1/8" thick.
Item # HDW-M5X12SET
$0.65


Set of two 5mm x 25mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts (For SWT-705)
Set of two 5mm OD x 25mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm. For mounting switch item # SWT-705 onto panels up to 5/8" thick. 
Item # HDW-M5X25SET
$0.75



"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Store Polices | Electric Scooter Repair Help | Dealer Discounts | Feedback | About Us

 

We Ship Internationally

             
Copyright© 2002-2020 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.