Parts  Repair Help  Contact Us  Shopping Cart  My Account  Projects 

Wire Connectors > Battery Connectors

Battery Connectors

Browse for battery harnesses by vehicle make and model.
For 1/4" or 6.3mm
Push-On Terminals
For #10 or 5mm
Bolt or Stud
For 1/4" or 6mm
Bolt or Stud

For 1/4" or 6.3mm Push-On Terminals

Our battery connector cables with 1/4" or 6.3mm wide push-on terminals are made with premium 12 gauge UL1015 automotive grade primary wire and have clear vinyl jacketed locking 1/4" (6.3mm) wide push-on connectors which snap-lock onto the battery terminal and require pushing a tab on the connector to release it from the terminal. The terminals are crimped onto the wire and wire insulation and then soldered onto the wire for extra strength.



ATO Fuse Holder with 14 Gauge Red Wire and 1/4" Push-On Connectors
Weather resistant ATO fuse holder with protective cap. Plastic cased high temperature ceramic base. Two 5" long 14 AWG red wires with 1/4" (6.3mm) wide push-on connectors. Rated for ATO fuses up to 40 Amps. Commonly used as a jumper wire in battery packs to provide fuse protection to the entire electrical system.
Item # FUS-360
$2.95


6" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Push-On Terminals
Six inch long battery pack jumper cable with 1/4" (6.3mm) wide push-on connectors. Made with 12 gauge stranded copper wire. High quality clear plastic covered locking type connectors require pushing a tab on the connector to release it from the battery terminal. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-146

$3.79


9" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Push-On Terminals
Nine inch long battery pack jumper cable with 1/4" (6.3mm) wide push-on connectors. Made with 12 gauge stranded copper wire. High quality clear plastic covered locking type connectors require pushing a tab on the connector to release it from the battery terminal. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-149

$3.95


12" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Push-On Terminals
Twelve inch long battery pack jumper cable with 1/4" (6.3mm) wide push-on connectors. Made with 12 gauge stranded copper wire. High quality clear plastic covered locking type connectors require pushing a tab on the connector to release it from the battery terminal. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-152

$4.10


15" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Push-On Terminals
Fifteen inch long battery pack jumper cable with 1/4" (6.3mm) wide push-on connectors. Made with 12 gauge stranded copper wire. High quality clear plastic covered locking type connectors require pushing a tab on the connector to release it from the battery terminal. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-155

$4.25


For #10 or 5mm Bolt or Stud (Fully Insulated)

Our fully insulated battery connector cables with 5.2mm ID ring terminals are made with premium high temperature silicone coated, fabric jacketed, vinyl insulated 12 gauge stranded copper wire. The ring connectors are covered by a plastic insulator with removable lid on all sides except for the bottom, making these connectors virtually short circuit proof. When wiring a battery pack it is best to Use A Short Jumper Cable When Possible And A Long Jumper Cable When Necessary.



4" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Insulated Ring Terminals
Four inch long battery pack jumper cable with top and side insulated 5.2mm ID ring terminal connectors. Tethered top insulator cap has a small hole in it for battery testing access. These premium battery cables are made with high temperature silicone coated, fabric jacketed, vinyl insulated 12 gauge stranded copper wire.
Item # CNX-180F

$3.49


10" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Insulated Ring Terminals
Ten inch long battery pack jumper cable with top and side insulated 5.2mm ID ring terminal connectors. Tethered top insulator cap has a small hole in it for battery testing access. These premium battery cables are made with high temperature silicone coated, fabric jacketed, vinyl insulated 12 gauge stranded copper wire.
Item # CNX-181F

$3.95

For #10 or 5mm Bolt or Stud

Our battery connector cables with 5.2mm ID ring terminals are made with premium 12 gauge UL1015 automotive grade primary wire. The ring connectors are crimped and then soldered onto the wire for extra strength. Heat shrink tubing is then installed over the exposed part of the terminal and wire insulation jacket.




10" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Ten inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-180

$3.95


12" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Twelve inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-181

$4.10


15" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Fifteen inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-182

$4.25


18" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Eighteen inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-183

$4.50


24" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Ring Terminals
Twenty four inch long battery pack jumper cable with 5.2mm ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-184

$4.95

For 1/4" or 6mm Bolt or Stud

Our battery connector cables with 1/4" ring terminals are made with premium 12 gauge UL1015 automotive grade primary wire. The ring connectors are crimped and then soldered onto the wire for extra strength. Heat shrink tubing is then installed over the exposed part of the terminal and wire insulation jacket.



10" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Ten inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-170

$3.95


12" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Twelve inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-171

$4.10


15" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Fifteen inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-172

$4.25


18" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Eighteen inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-173

$4.50


24" Long Electric Scooter and Bike Battery Pack Jumper Cable with 1/4" Ring Terminals
Twenty four inch long battery pack jumper cable with 1/4" ID ring terminal connectors. Made with 12 gauge stranded copper wire. Connectors are crimped onto the wire and then soldered for extra strength. Designed for interconnecting multiple batteries into a single battery pack.
Item # CNX-174

$4.95

Related Items: Wire | Fuses | Fuse Holders | Circuit Breakers



"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Store Polices | Electric Scooter Repair Help | Dealer Discounts | Feedback | About Us

 

We only carry the highest quality battery connection jumper cables made with premium 12 gauge UL1015 automotive grade primary wire. Our battery cables have high quality locking type connectors which are crimped and then soldered onto the wire for the highest level of safety and reliability. All of our battery connectors have flexible plastic covers over the connectors to protect them from short circuiting.

 

We Ship Internationally

             
Copyright© 2002-2020 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.