|
Sprockets > #35 Sprockets > Axle Sprockets and Hubs
Axle Sprockets and Hubs for #35 Chain
Axle Sprockets and Hubs
All of the axle sprockets and axle sprocket hubs on this page are Group 1 (G1) which are 100% compatible and interchangeable with each other.
On-Shelf Axle Sprockets with G1 Mounting Pattern
On-shelf axle sprockets are factory-made and can be added to the shopping cart if they are in stock. Any size axle sprocket with G1 mounting pattern for #35 chain
between 38 and 120 teeth can be custom-made so if you need a size that is not listed below then please visit our custom-made sprockets page.
Custom-Made Axle Sprockets with G1 Mounting Pattern
Important
Information These are custom-made sprockets which are machined on an
individual order basis so please allow for extra processing time when ordering. Custom-made sprocket orders cannot be cancelled after machining has begun on the sprocket and returns are not accepted on custom-made sprockets.
Any size axle sprocket with G1 mounting
pattern for #35 chain between 38 and 120 teeth can be custom-made so if you need
a size that is not listed below then please visit our custom-made sprockets page.
|
40 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
40 tooth aluminum sprocket. G1 mounting pattern. 5" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened) aluminum alloy.
Available with Straight or Beveled Teeth Ends.
Item # SPR-3540G1 |
With Straight Teeth Ends
$49.95
With Beveled Teeth Ends
$59.95
|
|
48 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
48 tooth aluminum sprocket. G1 mounting pattern. 5.95" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened)
aluminum alloy. Available with Straight or Beveled Teeth Ends.
Item # SPR-3548G1 |
With Straight Teeth Ends
$54.95
With Beveled Teeth Ends
$64.95
|
|
80 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
80 tooth aluminum sprocket. G1 mounting pattern. 9.801" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened)
aluminum alloy. Available with Straight or Beveled Teeth Ends.
Item # SPR-3580G1 |
With Straight Teeth Ends
$72.95
With Beveled Teeth Ends
$82.95
|
|
90 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
90 tooth aluminum sprocket. G1 mounting pattern. 10.995" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened)
aluminum alloy. Available with Straight or Beveled Teeth Ends.
Item # SPR-3590G1 |
With Straight Teeth Ends
$76.95
With Beveled Teeth Ends
$86.95
|
|
100 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
100 tooth aluminum sprocket. G1 mounting pattern. 12.188" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened)
aluminum alloy. Available with Straight or Beveled Teeth Ends.
Item # SPR-35100G1 |
With Straight Teeth Ends
$92.95
With Beveled Teeth Ends
$102.95
|
|
114 Tooth Sprocket for #35 Chain with G1 Mounting Pattern
114 tooth aluminum sprocket. G1 mounting pattern. 13.859" OD, 2" ID, 2.875" bolt circle diameter.
Four 3/8" ID bolt holes. Made of aircraft-grade tempered (hardened)
aluminum alloy. Available with Straight or Beveled Teeth Ends.
Item # SPR-35114G1 |
With Straight Teeth Ends
$96.95
With Beveled Teeth Ends
$106.95
|
Axle Sprocket Hubs with G1 Sprocket Mounting Pattern
|
3/16" x 3/16" x 3/4" Key Pin
3/16" x 3/16" x 3/4" steel key pin for sprocket hubs with 3/16" keyway. Compatible with item # HUB-201058 and HUB-201034 listed above.
Item # KEY-316X34
more key pins
|
$0.95
|
|
1/4" x 1/4" x 3/4" Key Pin
1/4" x 1/4" x 3/4" steel key pin for sprocket hubs with 1/4" keyway. Compatible with item # HUB-201100 and HUB-201114 listed above.
Item # KEY-104X34
more key pins
|
$0.95
|
|