|
|
All battery chargers on this page have standard 120 Volt wall plugs.
Browse 48 Volt Battery Chargers by Amp Rating
Browse All 48 Volt Battery Chargers
|
48 Volt 1.6 Amp Electric Scooter Battery Charger
48 Volt 1.6 Amp (48V 1.6A) electric
scooter/bike battery charger. Standard 110-125 Volt AC power input. Two-color
LED indicator lamp glows red when charging and green when charging is complete.
This is an automatic battery charger which stops charging and goes into float
mode when the charging
cycle is complete to prevent overcharging. Fan cooled. Weight 1.5lbs. Works with
electric scooters and bikes that have four 12 Volt batteries or one 48 Volt
battery.
 | All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
|
|
48
Volt 2.5 Amp Electric Scooter Battery Charger
48 Volt 2.5 Amp (48V 2.5A) electric scooter/bike battery charger. Standard
110-125 Volt AC power input. Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger which
stops charging and goes into float mode when the charging cycle is complete to prevent
overcharging. Fan cooled. Weight
2lbs. Works with electric scooters and bikes that have four 12 Volt batteries or one
48 Volt battery.
|
| All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
|
|
48 Volt 2.5 Amp Panterra and GIO
Electric Scooter Battery Charger
48 Volt 2.5 Amp (48V 2.5A) electric scooter/bike battery charger for Panterra
and GIO
electric scooters. Standard 110-125 Volt AC power input. Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger which
stops charging and goes into float mode when the charging cycle is complete to prevent
overcharging. Fan cooled. Weight 2lbs. Works with Panterra and GIO electric scooters that have four 12 Volt batteries or one 48 Volt battery.
|
| All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
| 48 Volt 2.5 Amp Charger
With 3-Port
House Plug for Panterra and GIO Electric Scooters |
 |
$49.95
Item #
CHR-48V2.5APAN |
|
|
48 Volt 3 Amp Electric Scooter Battery Charger
48 Volt 3 Amp (48V 3A) electric scooter/bike battery charger. Standard 110-125 Volt AC power input.
Two-color LED indicator lamp glows red when charging and green when charging is complete. This is an automatic battery charger which
stops charging and goes into float mode when the charging cycle is complete to prevent
overcharging. Fan cooled. Weight 2lbs. Works with electric scooters and bikes that
have four 12 Volt batteries or one 48 Volt battery.
|
| All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
|
|
48 Volt 5 Amp Electric Scooter/Moped/Bike Battery Charger
48 Volt 5 Amp (48V 5A) electric scooter, moped or bike battery charger. 110-120 Volt AC power input. Sturdy aluminum case with power switch and cooling fan. Fuse protected, extra fuses included. Two LED status indicators glow red when battery is charging and green when the charging cycle is complete. This is an automatic battery charger which stops charging and goes into float mode when the charging cycle is complete to prevent overcharging. Works with electric scooters, mopeds and bikes that have four 12 Volt batteries or one 48 Volt battery pack. Designed for charging 18Ah - 50Ah SLA battery packs.
|
| All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
|
|
48 Volt 6 Amp Electric Scooter/Moped/Bike Battery Charger
48 Volt 6 Amp (48V 6A) electric scooter, moped or bike battery charger. 110-120 Volt AC power input. Sturdy aluminum case with power switch and cooling fan. Fuse protected, extra fuses included. Two LED status indicators glow red when battery is charging and green when the charging cycle is complete. This is an automatic battery charger which stops charging and goes into float mode when the charging cycle is complete to prevent overcharging. Works with electric scooters, mopeds and bikes that have four 12 Volt batteries or one 48 Volt battery pack. Designed for charging 18Ah - 50Ah SLA battery packs.
|
| All of our battery charger have standard 120 Volt wall plugs and the output plugs pictured below are attached to the output cord. | |
|
Battery Charger Power Cables
|
|
Battery Charger Power Cable, Type A
Replacement electric scooter and bike battery charger power cable for battery chargers that use a 3-port (pc computer style) power input cable. This power cable goes between the power outlet on the wall and the battery charger.
Item # CNX-60024
|
$3.95
|
|
|
Battery Charger Power Cable, Type B
Replacement electric scooter and bike battery charger power cable for battery chargers that use a
2-port (circle 8 style) power input cable. This power cable goes between the power outlet on the wall and the battery charger.
Item # CNX-60026
|
$3.95
|
|
|
Battery Charger Power Cable, Type C
Replacement electric scooter and bike battery charger power cable for battery chargers that use a 3-port (Mickey
Mouse style) power input cable. This power cable goes between the power outlet on the wall and the battery charger.
Item # CNX-60028
|
$3.95
|
Battery Charger Connectors
 |
 |
 |
 |
2-Port Inline
Port 1 = Positive
Port 2 = Negative |
3-Port Inline
Port 1 = Positive
Port 3 = Negative |
3-Pin XLR
Pin 1 = Positive
Pin 2 = Negative |
4-Pin XLR
Pin 1 = Positive
Pin 2 = Negative |
 |
 |
 |
 |
3-Port House
Port N = Positive
Port L = Negative |
3-Port House for Panterra and Gio
Port N = Negative
Port L = Positive |
3-Pin House
Pin N = Positive
Pin L = Negative |
Polarized C7
Round = Positive
Square = Negative |
 |
 |
 |
|
Coaxial
Inside = Positive
Outside = Negative |
RCA
Inside = Positive
Outside = Negative |
Polarized
Port = Positive
Pin = Negative |
|
Port and Pin Numbers: The port and
pin numbers are usually embossed or imprinted on the plug-in end of the battery charger connector. 2-Port Inline - 2-port inline connectors are used on some versions of Rad-2-Go and Zappy
scooters plus a handful of other Chinese-made electric scooter brands. 3-Port Inline - 3-port inline connectors are by far the most common type of battery
charger connectors used on electric scooters. They are used on most Chinese-made electric scooters and bikes including the
following brands: Razor, Rad-2-Go, Boreem, E-Scooter, Scoot-N-Go, Sunl, Terminator, X-Treme, plus many others. 3-Pin XLR - 3-pin XLR connectors are commonly used on 12 Volt, 24 Volt, and 36 Volt
electric scooters. They are used on the following scooter brands: eZip, IZIP, Currie, Schwinn, GT, Mongoose,
Lashout, Xcaliber, Bladez, E-Boarder, Tomb Raider plus many others. 4-Pin XLR - 4-pin XLR connectors are used on newer models of eZip and IZIP 24 Volt and
36 Volt electric scooters and bicycles. -
3-Port House - 3-port house connectors are used on a large number of 36 Volt, 48 Volt,
and 60 Volts electric scooters including Electra® Voy, Tao Tao, Baja, X-Treme, Rad-2-Go, EVT, and E-Road plus many other brands.
-
3-Port House for Panterra and Gio - 3-port house connectors for Panterra and Gio electric scooters have reverse
polarity from standard electric scooters.
-
3-Pin House - 3-pin house connectors are used on HCF Cute 002, Cute 301, and Cute 302 and electric scooters.
-
Polarized C7 - Polarized C7 connectors are used on the City Bug E2 and Razor 132E electric scooters.
-
Coaxial - Coaxial connectors are most commonly used on smaller child-sized 12 Volt and
24 Volt scooters including Pulse, Razor, E-Scooter plus many others.
-
RCA - RCA connectors are commonly used on 24
Volt, 36 Volt, and 48 Volt electric scooters and bicycles. They are used on both
lead acid battery and lithium battery chargers however the trend is for them to be used primarily on lithium battery charger.
-
Polarized - Polarized connectors are used on some
older model 12 Volt electric scooters. They are used on Zappy (Zap)
Classic electric scooters and bikes and Sunpex E-Boarder electric scooters.
|
 |
Battery Charger Connector Installation Service
We can install any connector plug on any battery charger. If the
connector that you need is not listed with the battery charger that you need then please
give us a call to special
order it. |
Battery Charger Owners Guide
-
Always plug the battery charger into the electric
scooter, bike, or go kart before plugging into wall outlet.
When charging is complete unplug charger from wall outlet before
unplugging from scooter or bike.
-
To get the most life
out of your batteries recharge them as soon as possible after
every ride, even very small rides. Leaving a scooter battery in
a partially discharged state lowers the
useful life of the battery.
-
When a an electric scooter, bike, or go kart is in
storage or not being used frequently recharge the batteries at least
every 30 days.
-
The battery chargers sold on this page are designed for SLA
(Sealed Lead-Acid)
batteries. Any brand of SLA battery charger may be used on any
electric scooter, bike, or go kart that uses SLA batteries as long as the
Voltage, Amperage, Connector, and the connectors Pin Polarities
are the same as the vehicles original battery charger.
-
The
Amperage of the battery charger may be decreased for longer
battery life, or increased for a quicker recharge time. (see
charging rate chart below)
-
Automatic SLA
battery chargers are designed so that they can and will not
charge defective SLA batteries. This is a safety feature. If a
defective SLA battery is attempted to be charged it could
overheat and melt or damage the equipment that it is located in.
-
Good SLA batteries
bounce back above their rated Voltage level within a few minutes
after being discharged. If a SLA battery's Voltage does not
bounce back above its rated Voltage level within a few minutes
after being discharged then it is usually considered defective
or worn out.
-
Sometimes riders and rental stores want to use their
electric scooters, bikes, or go karts for more than one battery cycle per day so
they use battery chargers with a higher Amp rating than the
electric scooters original battery charger. These quick rate
battery chargers are typically rated in the 3 Amp through 6 Amp
power output range and recharge most electric scooter battery
packs in 2-3 hours, however they will slightly lower the
longevity of the battery pack when compared to using a slow rate
battery charger.
-
To preserve the life
of the batteries use
a slow rate battery charger whenever possible. If a scooter is
driven for more than one battery cycle per day then using a
smaller battery charger overnight, and a larger battery charger
during the day is the best solution.
-
Do
not use automotive or motorcycle battery chargers to charge SLA
batteries. These type of battery chargers are designed for
charging wet cell lead-acid batteries and if used on SLA
batteries may cause permanent damage to the battery and
equipment due to overcharging. and overheating.
|
Recommended Charging Rates for Electric Scooter Battery Packs
|
12 Volt
5-8 Ah Pack
|
12 Volt
9-15 Ah Pack
|
12 Volt
17-22 Ah Pack
|
24 Volt
5-9 Ah Pack
|
24 Volt
9-15 Ah Pack
|
24 Volt
17-22 Ah Pack
|
|
slow rate:
12V 1A
quick rate:
12V 2A
|
slow rate:
12V 1.5A
quick rate:
12V 3A
|
slow rate:
12V 3A
quick rate:
12V 6A
|
slow rate:
24V 1A
quick rate:
24V 2A
|
slow rate:
24V 1.5A
quick rate:
24V 3A
|
slow rate:
24V 3A
quick rate:
24V 6A
|
|
36
Volt
5-8 Ah
Pack
|
36 Volt
9-15 Ah Pack
|
36 Volt
17-22 Ah Pack
|
48 Volt
5-8 Ah Pack
|
48 Volt
9-15 Ah Pack
|
48 Volt
17-22 Ah Pack
|
|
slow rate:
36V 1A
quick rate:
36V 2A
|
slow rate:
36V 1.5A
quick rate:
36V 3A
|
slow rate:
36V 3A
quick rate:
36V 6A
|
slow rate:
48V 1A
quick rate:
48V 2A
|
slow rate:
48V 1.5A
quick rate:
48V 3A
|
slow rate:
48V 3A
quick rate:
48V 6A
|
|
