Speed Controller SPD-611B9 Installation and Wiring |
Rated Voltage | 36 Volts |
Rated For Motors | Up To 500 Watts |
Maximum Current | 25 Amps |
Rated For Chargers | Up To 3 Amps |
Conversion Efficiency | 95% |
Under Voltage Protection | 31 Volts |
Recommended Fuse Size | 30 Amps |
Under Voltage Battery Protection:
When the battery pack falls below a specific Voltage the controller
turns the motor off preventing over discharging of the battery pack
which extends the battery packs lifespan. (The cutoff value is
approximately 31.0 Volts ± 1.0 Volts) Motor Cut-Off During Braking: When the brakes are engaged the brake switch signals the controller to turn off the motor. |
*Power Connector Red = Positive Black = Negative |
|
Motor Connector |
Required Connection |
Key Switch Connector Mating Connector Item # CNX-52 |
Required Connection |
6 Wire Throttle/Brake Lever Switch/Battery Gauge Connector Throttle = Black, Red, Green Brake Switch = Pink, Blue Battery Indicator = Yellow, Black Mating Connector Item # CNX-54 |
Throttle is a Required Connection ~Brake Switch & Battery Gauge are Optional Connections |
Battery Charger Connector Red = Positive Black = Negative |
~Optional Connection |
Power Light Connector
Blue = Positive Brown = Negative Mating Connector Item # CNX-70 |
~Optional Connection |
Brake Light Connector
Red = Positive Black = Negative Mating Connector Item # CNX-51 |
~Optional Connection |
*The power connector should be the last connection made. *Fuse or circuit breaker protection is required between speed controller and battery pack. ~Optional Connections do not need to be hooked up for the speed controller to operate. |