|
Speed Controller SPD-24180 Installation and Wiring |
|
|
| Rated Voltage | 24 Volts |
| Rated For Motors | Up To 180 Watts |
| Maximum Current | 15 Amps |
| Rated For Chargers | Up To 1.6 Amps |
| Conversion Efficiency | 95% |
| Under Voltage Protection | 20.5 Volts |
| Recommended Fuse Size | 20 Amps |
| Under Voltage Battery Protection:
When the battery pack falls below a specific Voltage the controller
turns the motor off preventing over discharging of the battery pack
which extends the battery packs lifespan. (The cutoff value is
approximately 20.5 Volts ± 1.0 Volts) Motor Cut-Off During Braking: When the brakes are engaged the brake switch signals the controller to turn off the motor. |
|
|
|
*The battery pack
should be the last connection made. *Fuse or circuit breaker protection is required between the speed controller and the battery pack. |