Speed Controller SPD-12250 Installation and Wiring |
|
Rated Voltage | 12 Volts |
Rated for Motors | Up To 250 Watts |
Maximum Current | 21 Amps |
Rated for Chargers | Up To 3 Amps |
Conversion Efficiency | 95% |
Under Voltage Protection | 10.5 Volts ± 0.5 Volt |
Recommended Fuse or Breaker Size | 30 Amps |
Dimensions | 3" Long x 2-3/8" Wide x 1-1/2" High |
Versatile Motor Power Range: Works with 12 Volt motors that are 250 Watts
and under. Designed for 150 Watt, 175 Watt, 180 Watt, 200 Watt, 225 Watt, and 250 Watt
motors. Under Voltage Battery Protection:
When the battery pack falls below a specific Voltage the controller
turns the motor off preventing over discharging of the battery pack
which extends the battery packs lifespan. (The cutoff value is
approximately 10.5 Volts ± 0.5 Volts) |
*Power Connector
Mating Connector Item # CNX-50 |
|
|
Motor
Connector
Mating Connector Item # CNX-50 |
Required Connection |
|
Throttle
Connector
Mating Connector Item # CNX-52 |
Required Connection |
|
Key
Switch Connector Mating Connector Item # CNX-51 |
Required Connection |
|
Battery Charger Connector
Mating Connector Item # CNX-51 |
~Optional Connection |
|
Brake
Light Connector Mating Connector Item # CNX-51 |
~Optional Connection |
|
Brake
Lever Switch Connector Mating Connector Item # CNX-51 |
~Optional Connection |
|
Power
Light Connector Mating Connector Item # CNX-51 |
~Optional Connection |
*The power connector
should be the last connection made. *Fuse or circuit breaker protection is required between speed controller and battery pack. ~Optional Connections do not need to be hooked up for the speed controller to operate. |